1973 Ford Mustang

This is what the car looked like when the customer brought it to us.

Floor pans were put in this car incorrectly before it was delivered to us...

so they were removed, cleaned up and reinstalled correctly. Here's Fred working on the floor.

Here's a shot of the stock suspension before modifications were made.

The stock rearend and suspension was taken out of the car so the custom suspension process could begin.

The rearend was stripped of everything that was attached...

and repositioned under the car so that the custom suspension could be mocked-up and the roll cage could be installed.

Here's Fred setting the angle on the main hoop of the cage.

This is showing how the the main hoop and ladder bar bracket was attached.

We ran the cage back through the trunk and welded it to the rear frame rails.

Here's Fred final welding the roll cage.

This shows the stock rearend with the custom suspension brackets welded on.

This is what the custom suspension...

and roll cage looked like when the customer picked up his car. He will finish the rest himself.